I/O Expansion Module
Electronic devices that allow the expansion of digital and analog inputs and outputs of Sices control boards.
Our range.
Each module is designed to be mounted on a DIN rail.
Dimensions: 103(H) x 35(L) x 119(D)mm
Weight: approximately 230g.
Module that allows the connection of 3 thermocouples. Signals are galvanically isolated from each other and from the power supply. It can be used as an expansion of Sices boards that also use different types of thermocouples on the same module.
- The module is available in CANBUS and MODBUS RS485 versions
- Power supply voltage: 7-32VDC
- Current absorption: 200mA (@ 13V)
- Power consumption: 2.4W
- Thermocouple input isolation: 1000V
- Weight ~220g.
This device allows the connection of 3 independent PT100 thermoresistances, galvanically isolated from power and from each other. It can be used as an expansion for Sices cards that support its use and by using thermoresistances with a two or three-wire connection.
- The module is available in CANBUS and MODBUS RS485 versions
- The power supply voltage is 7-32VDC
- Current consumption is 200mA (@ 13V)
- Power consumption of 2.4W
- Thermocouple input insulation is 1000V
- Weight ~220g
This device has four independent channels for acquiring voltage (0-5, 0-10V) or current (0-10, 0-20 mA) signals. The channels are galvanically isolated from each other and from the power supply line. It can be used as an expansion of Sices boards that support its use. A measurement can be associated with each channel using the board's parameters. Both active and passive sensors can be used.
- Available in CANBUS and MODBUS RS485 versions
- Power supply voltage: 7-32 VDC
- Current consumption: 200mA (@ 13V)
- Power consumption: 2.4W
- Thermocouple input isolation: 1000V
- Weight ~220g
This digital potentiometer provides an adjustable current loop output of +/- 20mA. It can be used as an alternative to traditional motorized potentiometers and can be connected to different devices such as speed controllers, voltage regulators, power factor controllers, etc., that require either voltage or current input. The output can be controlled through UP/DOWN commands, Modbus RTU (RS485), or CANBUS J1939.
- Available in CANBUS and MODBUS RS485 versions
- Power supply voltage: 7-32 VDC
- Current consumption: 8mA at 10V
- The operating temperature ranges from -20°C to +60°C.
This electronic resistor integrates the functionality of a motorized resistor. When an AVR needs a motorized resistor, which can often be very expensive, it can be replaced with a DIRES.
- 5 different nominal resistance: from 640Ω to 10kΩ
- Supply Voltage: 7,5...32 Vdc
- Current absorbed: 80mA (@ 10V)
- Operating temperature: -20° C to 70° C
Device Able to expand the available digital inputs and outputs on your supported Sices controllers.
- 16× Input and 8× Output (1A C/O)
- Input Voltage: 7-32 VDC
Max. Absorbed current: 220mA (@ VCC=30V, Vout=10V, Zout=100Ω) - Max. relay Current: 5A
4 Analogue outputs module.
Available in CANBUS or MODBUS RS485 versions.
Device able to provide voltage, current signals and current loop, using four different and galvanic insulated channels and power lines.
- Input Voltage: 7-32 VDC
- Typ. Absorbed: current 280mA (@ 13V)
- Max. Absorbed: current 380mA (@ 13V)
- Typ. consumption: 3,7W
- Max. consumption: 4,9W
- Input isolation: 1000V
CONTACT US
Do you want more information?
Contact Us.
Tell us about your idea and your needs, and we will leverage our expertise to provide you with a tailored solution that fits your project best.