S.I.C.E.S. S.R.L.

GC 600

BTB 200

Microcontroller-based device for the
bus tie breakers management

Icon

18 x Digital inputs

Icon

18 x Digital outputs

Icon

7 x Analogue inputs

Icon

2 x Analogue outputs

Icon

AND/OR Logic control

Icon

Fully configurable history logs

Icon

16 Calendars and 4 timers

Icon

USB port

Icon

RS232

Icon

RS485

Icon

Ethernet connection

Description

The BTB200 controller provides the ability to control a bus tie breaker, for applications where it is necessary to divide the common bus-bars during certain operating conditions.

It manages the synchronisation between the two separated halves of the bus-bars (named A and B), based on an input signal, taking into account the number of generator sets connected on the two halves.

Generator sets synchronisation is achieved directly by the CANBUS connection to the SICES genset controllers, or alternatively by using analogue lines.

BTB200 measures the current flow across the tie breaker (3ph) by means of current transformers. It is able to measure the active (kW), reactive (kvar) and apparent power (kVA) exchanged on the bus-bars (and the power factor too), showing the flowing direction (A to B or B to A) on the display and by the LEDs on the front panel.

BTB200 also measures the total energy on the bus-bars using energy counters (active and reactive, A to B and B to A).

Further details

For complex applications, it is possible to connect at the same CANBUS up to 8 BTB200 bus tie breaker controllers, and up to 16 MC200 mains controllers and up to 16 GC600 or 24 DST4602Evolution genset controllers.
BTB200 provides several different communication options, to ensure easy integration with remote monitoring facilities and building management systems.
A large full colour display presents operating status in a clear easy to view format. Combined with generous input and output capability that means complex sites can be tackled with ease.

Communication

Application example

Rear view connections and dimensions

Embedded functions

  • Automatic or manual selection of the synchronisation direction.
  • Automatic or manual synchronization.
  • Voltage, frequency and phase matching in synchronizing.
  • Direct management of motorized circuit breakers or contactors.
  • Dedicated push buttons for manual opening/closure of the bus tie breaker.
  • Four alternative configurations.
  • Real time clock.
  • Periodical and “on event” data recording.
  • Embedded alarm horn.

Calculated values

  • Active, reactive, apparent powers and power factors flowing on the bus tie breaker (total and single phase).
  • Active and reactive energy counters (both A->B and B->A).

Multilingual device

Default display languages:
EN, IT, PT.

Additional languages downloadable with boardprg tool:
ES, FR.

Bus A/B protections

  • Under frequency (81U).
  • Over frequency (81O).
  • Under voltage (27).
  • Over voltage (59).

Current protections

  • Instantaneous overcurrent (50).
  • Time dependent overcurrent (51).
  • Phase overcurrent with voltage restraint/control (50V/51V).
  • Maximum auxiliary current.

Other protections

  • High/low supply voltage.
  • Supply voltage: 8…32 Vdc.
  • Power consumption: typical less than 6W (stand-by, controller switched on, LCD lamp switched off).
  • Operating frequency: 50Hz or 60Hz.
  • 4.3’’ TFT colour display with backlight.
  • Graphic display resolution: 480x272 pixel.
  • Graphic display dimensions: visible surface 95 x 54 mm.
  • Operating temperature: -25 °C to +60 °C.
  • Storage temperature: -30 °C to +80 °C.
  • Protection degree: IP65 (only with gasket correctly installed).
  • Weight: 1100g.
  • Overall dimension: 244 (W) x 178 (H) x 83 (D).
  • Panel cut-out: 218x159 mm (L x H).
  • EMC: conform to EN61326-1.
  • Safety: built in conformity to EN61010-1.

Commercial datasheets

© 2020 S.I.C.E.S. Società Italiana Costruzioni Elettriche Sumirago S.R.L.
Via Molinello n. 8/B 21040 - JERAGO CON ORAGO (VA) | Tel. +39 0331212941 | Fax +39 0331216102
Codice Fiscale, Partita IVA e N. Iscrizione al Registro Imprese CCIAA di Varese 00587340126 R.E.A. CCIAA di Varese 142977 VAT Number IT00587340126 Capitale Sociale € 500.000 i.v.

Design & programming Graphic studio VLADO
Cookie Policy | Privacy Policy | DURC